Hello，Welcome To(Taiwan) PERFECT International GroupDongguan PERFECT Instrument Co., Ltd.！
400-6677-223
National Advisory Service Hotline
Products center
Products
Tensile Testing Machine
Universal Material Testi..
Temperature Controlled T..
Top Pressure Gauge
Adhesive Tape Test Machi..
Tape Holding Force Testi..
Peel Strength Test Machi..
Constant Temperature And..
High And Low Temperature..
Rain Dust Salt Spray Tes..
Constant temperature hum..
Aging Test Machine
Yellowing Resistance Tes..
Oven
Bag Leather Testing Mach..
Paper Product Testing Ma..
Friction Wear Testing Ma..
Humidity Test Machine
High Water Resistance Te..
Fixture And Other Assist..
Contact
Dongguan PERFECT Instrument Co., Ltd.
Service hotline：400-6677-223
Tel：+86-769-85818235、85831561、85831562
phones：13925560690、18929474643
Service line：+86-769-88033026
Fax：+86-769-85818236
Operation center：2 plant,ShiMeiShangLian temple,WanJiang Area,Dongguan
Manufacturing center：Houjie town of Dongguan City -- the material testing machine center
Changping Town, Dongguan City -- the manufacturing center of the simulation environment test machine
Website：www.szfutongxiang.com
- PT-5061A electronic pressure gauge
BOTTLE COMPRESSION RESISTANCE TESTER PET
Design standard: QB/T18682665
Electronic top pressure instrument uses: for the instrument of the food processing industry packaging bottle and other containers of top pressure strength test, test of the bottle top pressure strength, top pressure deformation, holding pressure deformation. Equipped with the corresponding fixture can be measured with the bottle and packaging with edgewise compressive properties of tensile and tear test film.
Electronic type top pressure device has the advantages of: completely change the traditional material testing machine machine bulky, complicated operation, performance of a single defect structure with the senior paint treatment of aluminum extrusion seal board built-in high precision, low resistance, gapless roll line screw and a guide post; measure and control system data recovery set and high operation speed, test results can be by the liquid crystal display or by needle type printer or printer to print output, to pull or pressure holding test. Product performance is stable and reliable, high measurement accuracy, easy to operate and easy to operate. Specifications：
Model
PT-5061A
Capacity selection
100、200KG Optional one
Test items
The top pressure, the deformation of the top pressure, the deformation of the holding pressure, the tensile strength of the film, and the tearing strength of the film
Monitor
Power and extended display
Accuracy of measurement
Better than ±1.0%
Force resolution
1/10，000
Effective range of measurement
1~100%F.S
Deformation display accuracy
Better than ±1.0%
Test speed range
5～400mm/min，Can be arbitrarily set
Test maximum stroke
Maximum 650mm, no fixture
Effective test space
Distance 120mm，Left and right distance ∝
Power unit switch
kgf，gf ，N，kN，Ibf
Stress unit switch
MPa，kKPa，kgf/cm2，Ibf/in2
Deformation unit switch
mm，cm，in
Stop mode
Upper and lower limit safety setting, emergency stop button, program strength and elongation setting, test piece failure
Point method
The function of manual and pre - set points in the test procedure
Standard configuration
Top pressure fixture (120mm) 1, film tensile fixture 1, power supply line 1, CD operating instructions 1, 1 copies of the certificate, 1 copies of warranty card
Machine size
About 57×47×120cm(W×D×H)
Machine weight
About 35kg
Power
Stepping motor
Power Supply
1PH，AC220V，50/60Hz，10A Or specify
Details
Copyright©Dongguan Perfect Instrument Co., Ltd.National service phones：400-6677-223 Fax：0769-85818236
Address：2 plant,ShiMeiShangLian temple,WanJiang Area,Dongguan
Address2：MinzhiWu Street N0.147,QingShui area,Taizhong City,Taiwan Province